<pre id="krc572"></pre>
      <button id="7l2zrh"></button><bdo id="7l2zrh"></bdo><th id="7l2zrh"></th>
      1. Home  |  Sitemap  |  Contact Us     
        MIG Welder(Split Model)
         Product Description :

        NBC-MF Series CO2 MIG Welding Machine (Split Model)

        n    Product characteristics

            Light weight, simple installation and easy-to-operation;

            The machine may produce less spatters, better arc, deep bath and high duty cycle;

            The wires can be fed stably, conveniently and silently by consuming less energies;

            As wires with larger diameters can be welded, the machine can be widely used.

        n    Applicable ranges

            The machine may weld metals of stainless steel, carbon steel and others, and it is especially suitable for the welding of low carbon steel sheet and alloy steel sheet;

            It may use various fine welding wires made of carbon steel.

        n    Options

            Welding gun

            Pressure reducing valve

            Earth clip

            Complete set of welding cables

        Ordering guidance

        Material

        Welding method

        Diameter of welding wire (mm)

        Welding current (A)

        Applicable model

        Carbon steel/low alloy steel/ stainless steel

        CO2 / MAG

        Ø0.6/ Ø0.8

        50 ~ 200

        NBC-200MF

        Carbon steel/low alloy steel/ stainless steel

        CO2 / MAG

        Ø0.8/ Ø1.0

        50 ~ 250

        NBC-250MF

        Technical parameters

        Parameters

        NBC-200MF

        NBC-250MF

        Power supply voltage (V)

        Single phase AC 220V ±15%, 50Hz

        Three phase AC 380V ±15%, 50Hz

        Rated input voltage (kVA)

        6.5

        9.0

        No-load voltage (V)

        52

        52

        Adjusting of output current (A)

        50 ~ 200

        50 ~ 250

        Rated output voltage (V)

        24

        26.5

        Efficiency (%)

        80

        85

        Duty cycle (%)

        60

        60

        Power factor

        0.73

        0.93

        Insulation class

        F

        F

        Enclosure protection class

        IP 21S

        IP 21S

        Type of wire feeder

        Single drive

        Single drive

        Wire feeding speed (m/ min)

        1 ~ 15

        1 ~ 15

        Gas post-flow time (S)

        2

        2

        Diameter of welding wire (mm)

        Ø0.6~ Ø0.8

        Ø0.8~ Ø1.0

        Recommended thickness of slab (mm)

        0.8 ~ 5 mm

        1 ~ 7 mm

        Overall dimension of main machine (L×W×H) mm

        570×330×427

        570×330×427

        Overall dimension of wire feeder (L×W×H) mm

        511×352×370

        511×352×370

        Weight of main machine (kg)

        20

        21

        Weight of wire feeder (kg)

        13.5

        32.5

         You are here : Home > Products > Welding Machine > Civil Welding Machine
         Update : 2013-05-29 16:02:33  Clicks : 3610 Print This Page Email Us