<dd id="2d6vsa"></dd><th id="2d6vsa"></th><thead id="2d6vsa"></thead>
          • Home  |  Sitemap  |  Contact Us     
            CDI9800 Series Vector Frequency Inverter
             Product Description :
            CDI9800 Series Vector Frequency Converter
            Technical specification
            Item
            Index and Specification
            Main Power Input
            Rated Voltage; Frequency
            Three Phase. 380V; 50Hz/60Hz
            Allowable Value for Change
            Voltage: ±20%, Voltage Imbalance Rate <3%; Frequency: ±5%
            Main Power Output
            Output Voltage
            Three Phase, 0~380V
            Output Frequency
            0Hz~400Hz
            Overload Capability
            150% Rated Output Current for 2 minutes; 180% Rated Output Current for 10 minutes
            Control Performance
            Modulation Mode
            Optimum Voltage Vector PWM mode
            Control Mode
            With PG Feedback Vector Control/ Without PG Feedback Vector Control/ V/F Control
            Preset Mode of Run Command
            Panel Preset; External Terminal Preset; Host Computer Preset through Serial Communication Interface
            Speed Preset Mode
            Operation Panel Digital Setting; Analogue Setting; 11 Kinds of Speed (Frequency) Setting Mode as  Host Computer Serial Communication
            Speed Preset Accuracy
            Digital Setting: ±0.01% (-10℃~+40℃); Analogue Setting: ±0.05% (25℃±10℃)
            Speed Preset Resolution
            Digital Setting: 0.01Hz; Analogue Setting: Max. Frequency 1/2000
            Speed Control Accuracy
            With PG Feedback Vector Control: ±0.05%; (25℃±10℃)
            With PG Feedback Vector Control: ±0.5%; (25℃±10℃)
            Speed Control Range
            With PG Feedback Vector Control: 1:1000; Without PG Feedback Vector Control: 1:100
            Torque Control Response
            With PG Feedback Vector Control: <150ms; Without PG Feedback Vector Control: < 200ms
            Starting Torque
            With PG Feedback Vector Control: 200%/0rpm;Without PG Feedback Vector Control: 150%/0.5Hz
            Torque Control Accuracy
            ±5%
            Control Input and Output Signal
            Setting for Reference Voltage Output
            Line 2, +/-10V, 5mA
            Current Controlled Voltage Source Output
            24V, 100mA
            Analogue Input
            Line 2, DC -10V~+10V, 11bit+ Sign Digit,
            Line 1, DC 0~10V/0~20mA, 10bit, select from
            the position on the side of V/I through mainboard JP1
            Analogue Instrument Output
            Line 2, 0~10V/0~20mA, Programmable Output, 11 Kinds of output quantity for option
            Contact Input of Run Command
            Line 2, FWD/STOP and REV/STOP Control Command Input Contact Terminal
            Programmable Contact Input
            Programmable Line 8, 30 kinds of Run Command for option, such as Failure Preset, Torque Control, Preliminary Excitation Command, etc.
            PG Signal Input
            A+, A-, B+, B- Differential Input/A-, B- Open Collector Coded Disc Input
            Open Collector Output
            Line 2, 14 kinds of Running Status for option. Max. Output Current: 50mA
            Programmable Relay Output
            Line 1, 14 kinds of Running Status for option.
            Contact Capacity: AC 250V /3A or DC 30V /1A
            Relay Output for Fault Alarm
            Line 1, Contact Capacity: AC 250V /3A, or DC 30V /1A
            Serial Communication Interface
            Interface RS-485
            Display
            Four Figures Digital Display (LED)
            16 kinds of State Parameters, such as Setting Frequency, Output Frequency, Output Voltage, Output Current, Motor Speed, Output Torque, On-off Terminal, Programmed Menu Parameters and 28 Kinds of Fault Codes
            Indicator Lamp (LED)
            Parameter Unit, Motor Running Direction and Description for RUN/STOP State
            Environment
            Places for Use
            Indoor, Without Direct Sunlight and No Dust, Corrosive Gas, Combustible Gas, Oil Mist, Water Vapor, Dropping Water or Salt, etc.
            Altitude
            1000m below sea level
            Ambient Temperature
            -10℃~+40 ℃
            Humidity
            20%~90% RH, No Water Drop Condensation
            Vibration
            Less than 5.9m/s2 (0.6g)
            Storage Temperature
            -20℃~+65℃
            Structure
            Protection Level
            IP20
            Cooling Mode
            Force Air Cooling
            Installation Mode
            Wall-mounted Type
            2.3   CDI9800 series inverter
            400V Voltage Level Series
            Model
            Rated voltage
            Rated frequency
            Rated output current
            Applicable motor
            CDI9800 -G5R5T4
            380v
            5.5kW
            13A
            5.5kW
            CDI9800 -G7R5T4
            380v
            7.5kW
            17A
            7.5kW
            CDI9800 -G011T4
            380v
            11kW
            24A
            11kW
            CDI9800 -G015T4
            380v
            15kW
            32A
            15kW
            CDI9800 -G018.5T4
            380v
            18.5kW
            37A
            18.5kW
            CDI9800 -G022T4
            380v
            22kW
            45A
            22kW
            CDI9800 -G030T4
            380v
            30kW
            60A
            30kW
            CDI9800 -G037T4
            380v
            37kW
            75A
            37kW
            CDI9800 -G045T4
            380v
            45kW
            90A
            45kW
            CDI9800 -G055T4
            380v
            55kW
            110A
            55kW
            CDI9800 -G075T4
            380v
            75kW
            150A
            75kW
             You are here : Home > Products > Freuency Inverter
             Update : 2012-11-01 11:13:55  Clicks : 6297 Print This Page Email Us